Place latch in door jamb against inside edge. Holding latch firmly, mark holes. Drill 1/8" pilot holes. Install latch using enclosed screws.
Slide door to fully closed position. Open locking bolts on lock. Position lock on door. Center lock over latch and close bolts. Drill 1/8" pilot holes through lock assembly. Install lock using enclosed screws.
Install cover plate by pushing firmly from side-to-side until it snaps into place.
FINISHED! Easy as 1, 2, 3!!
Distributed by CAL America, Inc. R. John Allcorn, President (727) 463-5975
